GENERIC NAME: Static Dissipative Adhesive Backed Film
DATE ISSUED: June 5, 2018
MANUFACTURER: SciCron Technologies, LLC
MANUFACTURER PHONE: 806-372-8300
ADDRESS: 501 Amarillo Blvd. West
MANUFACTURER FAX: 806-372-8333
CITY, STATE, ZIP: Amarillo, TX 79107
EMERGENCY (PLANT MANAGER): 806-372-8300
2. HAZARDS IDENTIFICATION
This material is classified as not hazardous under OSHA regulations. Under normal conditions of use, this product is not expected to create any unusual industrial hazards. Irritating gases/fumes may be given off during burning or thermal decomposition. Contact with hot material with cause thermal burns.
EYE CONTACT: Flush with large amounts of water until irritation subsides. Obtain medical attention.
SKIN CONTACT: If molten material contacts skin, cool rapidly with cold water and obtain medical attention for thermal burn.
INGESTION: This material is not expected to be absorbed within the gastrointestinal tract, therefore induction of vomiting should not be necessary.
5. FIRE FIGHTING MEASURES
Suitable Extinguishing Media: Carbon dioxide, dry chemical, or water.
Fire Fighting Procedure: Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic and irritating fumes.
Fire/Explosion Hazards:This product is a combustible thermoplastic material that burns vigorously with intense heat.
6. ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTION: Ensure adequate ventilation. Wear personal protective equipment. Do not breathe dust. Remove all sources of ignition.
ENVIRONMENTAL PRECAUTIONS: Do not allow to enter soil, waterbodies, or drains.
METHODS FOR CLEANING UP: Avoid generation of dust. Remove all sources of ignition. Sweep or scoop up into closed containers for disposal.
7. HANDLING AND STORAGE
MAX: Storage Temperature 90°F / 32°C
HANDLING: Ensure appropriate exhaust and ventilation at machinery and at places where dust can be generated. Avoid dust formation, accumulation of static charges. Prohibit sources of spark and ignition, such as smoking. Processing of this product under high temperatures will cause hazardous emissions of vapors, carbon monoxide, or carbon dioxide.
STORAGE: If this material is stored under ambient temperature conditions, it is not hazardous. However, extensive storing at higher than 581°F / 305°C will emit vapors, carbon monoxide, or carbon dioxide.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EXPOSURE GUIDELINES: Not applicable
VENTILATION MEASURES: Provide good ventilation and/or an exhaust system in the work area.
EYE PROTECTION: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations 29 CFR 1910.133 or European standard EN166
RESPIRATORY PROTECTION: None required under normal conditions.
SKIN AND BODY PROTECTION: Wear appropriate protective gloves and clothing to prevent skin exposure.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM:
Solid Sheet
APPEARANCE:
Clear to Opaque
ODOR:
Not Applicable
pH:
Not Applicable
MELTING POINT:
482°F/ 250°C
BOILING POINT:
Not Available
FLASH POINT:
Not Determined
DECOMPOSITION TEMPERATURE:
581°F / 305°C
AUTO-IGNITION TEMPERATURE:
734⁰F (390⁰C) approx.
EXPLOSION LIMITS:
Not Applicable
EVAPORATION RATE:
Not Applicable
VAPOR PRESSURE:
Not Applicable
VAPOR DENSITY:
Not Applicable
RELATIVE DENSITY:
1.1 approx.
SOLUBILITY IN WATER:
Insoluble
10. STABILITY AND REACTIVITY
STABILITY: Product is stable under normal conditions.
DECOMPOSITION PRODUCTS: Carbon Monoxide & Carbon Dioxide from burning. When heated to decomposition, vapors can react with oxidizing materials forming strong acrid fumes.
CONDITIONS TO AVOID: Incompatible products. Excess heat. Keep away from open flames, hot surfaces, and ignition sources.
11. TOXICOLOGICAL INFORMATION
No known toxicities.
12. ECOLOGICAL INFORMATION
ECOTOXICITY: This product is a solid, inert product with low volatility and is essentially insoluble in water.
MOBILITY: Due to the solid nature of this product, it should have low mobility in soil.
PERSISTANCE & DEGRABABILITY: This product is non-biodegradable.
BIOACCUMULATION: This solid product has a low potential for bioaccumulation.
13. DISPOSAL CONSIDERATIONS
Waste disposal should be in accordance with all federal, state, and local environmental laws and regulations.
14. TRANSPORTATION INFORMATION
Not subject to national and international regulations on the transport of dangerous goods.
15. REGULATORY INFORMATION
OSHA HAZARD COMMUNICATION:
Non-Hazardous
TOXIC SUBSTANCES CONTROL ACT:
Components listed
CERCLA HAZARDOUS SUBSTANCES (40CFR302):
None
SARA SECTION 311/312
Acute Health Hazard
No
Chronic Health Hazard
No
Fire Hazard
No
Sudden Release of Pressure Hazard
No
Reactive Hazard
No
16. OTHER INFORMATION
HMIS Rating:
Health = 0
Flammability = 1
Reactivity Hazard = 0
AS OF THE DATE OF THIS DOCUMENT, THE FOREGOING INFORMATION IS BELIEVED TO BE ACCURATE AND IS PROVIDED IN GOOD FAITH TO COMPLY WITH APPLICABLE FEDERAL AND STATE LAWS. HOWEVER, NO WARRANTY OR REPRESENTATION OF LAW OR FACT, WITH RESPECT TO SUCH INFORMATION, IS INTENDED OR GIVEN.
