SECTION I – PRODUCT AND COMPANY IDENTIFICATION

TRADE NAME: TMF-300™ Check Film GENERIC NAME: Static Dissipative Polyester Film MSDS NUMBER: SC-008 DATE ISSUED: April 23, 2004 MANUFACTURER: SciCron Technologies, LLC ADDRESS: 501 Amarillo Blvd. West CITY, STATE, ZIP: Amarillo, TX 79107 MANUFACTURER PHONE: 806-372-8300 MANUFACTURER FAX: 806-372-8333 EMERGENCY (PLANT MANAGER): 806-372-8300

SECTION II – COMPOSITION/INFORMATION ON INGREDIENTS

CHEMICAL NAME	CAS NUMBER	WT %	TLV	PEL
Polyethylene Terephthalate	25038-59-9	> 90	None	None
Tin Oxide	18282-10-5	< 4.0	2 mg/m3 (as SN)	2 mg/m3 (as SN)

SECTION III – HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW: There are no significant health hazards associated with exposure to this product. All ingredients are physically bound in the matrix during the manufacturing process and are not expected to create an exposure to individual components when the product is handled, processed, and used in its normal applications. Burning: Toxic gases and fumes are given off during burning or thermal decomposition. Burning produces intense heat and dense smoke. SIGNS AND SYMPTOMS OF OVEREXPOSURE: Overexposure to this product is not likely to cause any significant acute effect. HMIS RATING: Health: 0 Fire: 1 Physical Hazard: 0 Personal Protection: A POTENTIAL HEALTH EFFECTS: ROUTES OF ENTRY: Not applicable ACUTE EFFECTS: Acute effects are unlikely. CHRONIC EFFECTS: Chronic effects are unlikely. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Not applicable. CARCINOGENICITY: This product is not classified or regulated by NTP, IARC, or OSHA.

SECTION IV – FIRST AID MEASURES

No first aid measures are anticipated in normal use and application.

SECTION V – FIRE FIGHTING MEASURES

NFPA RATING: Health: 0 Fire: 1 Reactivity: 0 Other: — FLASH POINT AND METHOD: Not applicable. EXTINGUISHING METHOD: Water spray, dry chemical and foam. Carbon dioxide may permit re-ignition due to lack of cooling capacity. NFPA FIRE FIGHTING PROCEDURES: Use water spray or foam applied from a safe distance to avoid exposure to hazardous vapors and other decomposition products. FIRE OR EXPLOSION HAZARDS: Product is a combustible thermoplastic film. Because of the potential for dense smoke in a fire situation, fire fighters should wear approved self-contained breathing apparatus. HARMFUL COMBUSTION PRODUCTS: Intense heat, smoke, irritating toxic gases, and aerosols, including carbon dioxide, carbon monoxide, hydrocarbon fragments, and metal oxides may be generated by thermal decomposition when the product undergoes combustion.

SECTION VI – ACCIDENTAL RELEASE MEASURES

SPILL OR LEAK PROCEDURES: Sweep or pick-up fabrication debris. Debris may usually be disposed of in a non-regulated landfill. However, prior to disposal, it is recommended that the regulations in effect for the particular area where disposal is to take place be checked to prevent improper disposal.

SECTION VII – HANDLING AND STORAGE

STORAGE TEMPERATURE: Store in well ventilated areas at temperatures below 120° F (49° C). SPECIAL SENSITIVITY: None HANDLING PRECAUTIONS: Not applicable.

SECTION VIII – EXPOSURE CONTROLS/PERSONAL PROTECTION

EYE PROTECTION: Not normally required. SKIN PROTECTION: Not normally required. RESPIRATORY PROTECTION: Not normally required.

SECTION IX – PHYSICAL AND CHEMICAL PROPERTIES

PRODUCT USES: Static control film for check templates, separators, and OEM applications. PHYSICAL FORM: Clear plastic film. Weight per Square Foot: 14 grams MELTING POINT: Not applicable SOFTENING POINT: Not applicable

SECTION X – REACTIVITY

STABILITY: Product is stable under normal conditions. HAZARDOUS POLYMERIZATION: Will not occur. INCOMPATIBILITIES: None in designed use. DECOMPOSITION PRODUCTS: Burning or thermal decomposition may generate carbon monoxide, carbon dioxide, hydrocarbons and metal oxides. CONDITIONS TO AVOID: Exposure to high temperatures and direct flame.

SECTION XI – TOXICOLOGICAL INFORMATION

TOXICOLOGICAL HAZARDS: There are no reported toxicological hazards associated with this product.

SECTION XII – ECOLOGICAL INFORMATION

ECOLOGICAL INFORMATION: No data available.

SECTION XIII DISPOSAL CONSIDERATIONS

Product is non-hazardous. It may be incinerated or disposed of in a landfill in compliance with federal, state and local environmental regulations. Check before disposal to determine the details of such regulations in your area.

SECTION XIV – TRANSPORTATION CONSIDERATIONS

DOT NAME: Not regulated DOT LABEL: Not applicable DOT HAZARD CLASS: Not applicable UN/NA NUMBER: None PACKAGING GROUP: None FLAMMABILITY CLASS: None

SECTION XV – REGULATORY INFORMATION

OSHA STATUS: This product is not considered hazardous under OSHA criteria (see Section II). TSCA STATUS: Components of this product are included in the TSCA inventory. CERCLA REPORTABLE QUANTITY: Not applicable. SARA TITLE III SECTION 302 EXTREMELY HAZARDOUS: This product contains no extremely hazardous substances as defined and listed in section #302. SECTION 311/312 HAZARDOUS CATEGORIES: Not reportable under this section. SECTION 313 TOXIC CHEMICALS: Not reportable under this section.

SECTION XVI – APPROVALS

REASON FOR ISSUE: General Update PREPARED BY: Jack Clifford APPROVAL DATE: April 23, 2004 SUPERSEDES DATE: June 1, 2000

SECTION XVII – DISCLAIMER

AS OF THE DATE OF THIS DOCUMENT, THE FOREGOING INFORMATION IS BELIEVED TO BE ACCURATE AND IS PROVIDED IN GOOD FAITH TO COMPLY WITH APPLICABLE FEDERAL AND STATE LAWS. HOWEVER, NO WARRANTY OR REPRESENTATION OF LAW OR FACT, WITH RESPECT TO SUCH INFORMATION, IS INTENDED OR GIVEN.